86CM120C

2 phase, NEMA 34 frame size
129 mm (5.08 inch) long
6 A phase current
12 N.m (1700 oz-in) holding torque
14 mm (0.551 inch) shaft size
Built with high quality materials including bearings and shaft made by Japanese manufacturers
High precision, low motor heating, and low vibration

The CM series stepper motors can be implemented in many industrial motion control applications. Built with premium quality materials including bearings and shaft made by famous manufacturers, they can move the attached load at high precision and with very low motor heating & vibration.

Related Products

EM2RS-A882

RS485 Modbus RTU, 20-80 VAC or 30-100VDC, 8.2 A

EM882S

Enhanced stepper drive, 20-80 VDC, 8.2 A

DM2282-IO-24

Built-in a pulser for speed control, 150-230 VDC, 8.2 A

DMA882S-IO

Built-in a pulser for speed control, 20-80 VAC or 30-100 VDC, 8.2 A

DMA882-CAN

CANopen stepper drive, 20-80VAC or 30-110VDC, 8.2 A

DM2282

2-phase stepper drive, 150-230 VAC, 8.2 A

DM1182

2-phase stepper drive, 80-150 VAC, 8.2 A

DMA882S

Enhanced stepper drive, 18-80VAC or 24-110VDC, 8.2 A

Similar Products

86CM120-FS

1.8°, NEMA 34, 164 mm (6.46 inch), 6.0A/Phase, 12 N.m (1714.32 oz-in), IP65

86CM120-BZ

1.8°, NEMA 34, 172 mm (6.77 inch), 6.0A/Phase, 12 N.m (1714.32 oz-in), Brake: 24 V@4.0 N.m

86CM120

1.8°, NEMA 34, 129 mm (5.08 inch), 6.0A/Phase, 12 N.m (1714.32 oz-in)

Model	86CM120C
Frame Size (NEMA)	34
Length (mm)	129
Holding Torque (N.m)	12
Phase Current (A)	6.0
Shaft Diameter (mm)	14
Center Diameter (mm)	73
IP Rate	IP40
Characteristics	Standard
Resistance (ohm)	0.75
Inductance (mH)	5
Inertia (kg/cm2)	2.94
Weight (kg)	4.45