DM480-V-24

● 24VDC or 36VDC power supply

● Command source: simple switch signal, or I/O signal of PLC, or 0-10V analog input

● 24V logical voltage for motor start/stop and motor direction.

● Output current 8.4A for single-axis, 4.2A per motor for dual-axis

● Matched with NEMA 23, 24 stepper motors

● Suitable for speed control applications

Description

Specifications

Downloads

The DM series consists of stepper drives adopting Leadshine latest advanced stepper control technology. Those stepper drives are highly reliable with good performance and highly competitive cost. They can power a wide range of stepper motors from NEMA 8 to NEMA 34 (model dependent). DM-E stepper drives are easy to configure and setup. Output current and micro step resolution can be simply set up via DIP switches.

Related Products

57CM23-3A

1.8°, NEMA 23, 76 mm (2.99 inch), 3.0A/Phase, 2.3 N.m (328.58 oz-in)

57CM12C-3A-CZ

1.8°, NEMA 23, 53 mm (2.09 inch), 3.0A/Phase, 1.2 N.m (171.43 oz-in)

57CM13-3A

1.8°, NEMA 23, 55 mm (2.17 inch), 3.0A/Phase, 1.3 N.m (185.72 oz-in)

57CM13

1.8°, NEMA 23, 55 mm (2.17 inch), 4.0A/Phase, 1.3 N.m (185.72 oz-in)

57CM06

1.8°, NEMA 23, 41 mm (1.61 inch), 3.0A/Phase, 0.6 N.m (85.72 oz-in)

LSP-360-24

24 VDC power supply 15A continuous current

LSP-360-36

36 VDC power supply 10A continuous current

Model	DM480-V-24
Series	DM
Command Source	I/O, 0-10V analog
Operation Voltage (VDC)	20-40
Output Current (A, Peak)	8.4
Input Frequency (KHz, Max.)	/
Logical Voltage (VDC)	24
# of Inputs	3
# of Outputs	1
Characteristics	Dual-axis, built-in a pulser for speed control