57CM26-4A-0-I6

2 phase, NEMA 23 frame size
84 mm (3.31 inch) long
4 A phase current
2.6 N.m (369 oz-in) holding torque
6.35 mm (0.25 inch) shaft size
Built with high quality materials including bearings and shaft made by Japanese manufacturers
High precision, low motor heating, and low vibration

The CM series stepper motors can be implemented in many industrial motion control applications. Built with premium quality materials including bearings and shaft made by famous manufacturers, they can move the attached load at high precision and with very low motor heating & vibration.

Related Products

EM3E-556E

EtherCAT communication, 20-50 VDC, 5.6 A

EM2RS-556

Modbus RTU protocol using RS485, 20-50 VDC, 5.6 A

EM556-CAN

CANopen stepper drive, 20-50 VDC, 5.6 A

EM556S

Enhanced stepper drive, 20-50 VDC, 5.6 A

DM556E

Cost-effective stepper drive, 18-50 VDC, 5.6 A

Similar Products

57CM26-SZ

1.8°, NEMA 23, 83 mm (3.27 inch), 5.0A/Phase, 2.6 N.m (371.44 oz-in), Dual shaft

57CM26C

1.8°, NEMA 23, 83 mm (3.27 inch), 5.0A/Phase, 2.6 N.m (371.44 oz-in)

57CM26-BZ

1.8°, NEMA 23, 125 mm (4.92 inch), 5.0A/Phase, 2.6 N.m (371.44 oz-in), Brake: 24 V@0.75 N.m

57CM26-4A

1.8°, NEMA 23, 84 mm (3.31 inch), 4.0A/Phase, 2.6 N.m (371.44 oz-in)

57CM26

1.8°, NEMA 23, 84 mm (3.31 inch), 5.0A/Phase, 2.6 N.m (371.44 oz-in)

Model	57CM26-4A-0-I6
Frame Size (NEMA)	23
Length (mm)	84
Holding Torque (N.m)	2.6
Phase Current (A)	4.0
Shaft Diameter (mm)	6.35
Center Diameter (mm)	38.1
IP Rate	IP40
Characteristics	Standard
Resistance (ohm)	0.8
Inductance (mH)	3.2
Inertia (kg/cm2)	0.48
Weight (kg)	1.2