CS2RS-D507
Product Category

CS2RS-D507

● No loss of step, No hunting, No torque reservation.

● Low noise and vibration, smooth motion.

● Support Modbus RTU protocol, built-in 16-segment position instructions.

● Motion can be started by external I/O or RS485.

● Operation modes: profile position, profile velocity, homing.

● 7 configurable digital inputs, 3 optically isolated digital outputs. 


CS2RS Series are closed loop stepper drive based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes, built-in PR feature with 16-segment position table (PR Mode). They can not only solve the problem of step loss in the open loop stepper system, but also can save additional controllers in most of point-to-point applications, to greatly enhance system reliability and reduce the cost. CS2RS Series also support the feature of teaching, the operation modes of Profile Position, Profile Velocity and Homing. CS2RS-D503 can power 2-phase NEMA 17, 23, 24 stepper motors with 1000 ppr to 5000 ppr incremental encoders.

Technical Data
ModelCS2RS-D507
SeriesCS2RS
Command SourceModbus RTU
Operation Voltage (VDC)20-50
Output Current (A, Peak)7.0
Input Frequency (KHz, Max.)10
Logical Voltage (VDC)12-24
# of Inputs7
# of Outputs3
CharacteristicsStandard


Mechanical

367a3956ca6514549b547cd5c88a8ae7.jpg

Product Category
L e a d s h i n e
Stay in Touch With Us
Sign Up !